Short: PageStream 3.0c Free Update Author: Soft-Logik Publishing Corporation Uploader: Matt_H amiga org Type: text/dtp Architecture: m68k-amigaos WELCOME TO THE PAGESTREAM 3.0c FREE UPDATE! ------------------------------------------- There is only 1 archive file for this update. You must have version 3.0b currently installed on your hard drive before using this update installer, and you must have disk 1 of your original PageStream3 disk set available. If you currently have 3.0a, you need to first use these patches: - PS3BA1.LHA - you need this file to upgrade from 3.0a - PS3B2.LHA - additional DMF fonts (see below) - PS3B3.LHA - updated help files and macro definitions If you currently have 3.0, you need to first use these patches: - PS3B01.LHA - you need this file to upgrade from 3.0 - PS3B2.LHA - additional DMF fonts (see below) - PS3B3.LHA - updated help files and macro definitions Once you have 3.0b correctly installed, you can double click on the Install-PageStream3.0c icon in the 3.0cUpdate drawer. THE CONTENTS OF THIS ARCHIVE ARE COPYRIGHT 1994 SOFT-LOGIK PUBLISHING CORPORATION. (EXCEPT FOR SPATCH WHICH IS COPYRIGHT 1992 SAS INSTITUTE AND LHEX WHICH WAS WRITTEN BY COMMODORE.) THIS ARCHIVE CAN BE DISTRIBUTED AS LONG AS IT IS LEFT INTACT WITHOUT ANY CHANGES! NO CHARGE ASIDE FROM A REASONABLE COPYING AND DISK FEE CAN BE CHARGED FOR IT. ©1994 SOFT-LOGIK PUBLISHING CORP. CHOOSE MACROS/VIEW README.NOW TO READ THIS FROM WITHIN PAGESTREAM3 This is the second in a series of free update patches to PageStream3. This update implements more features and fixes problems with the initial release. We recommend not attempting tutorial lessons 2, 3 and 4 at this time because a few of the required features are not implemented. Lessons 1 and 5 can be done now. NOTES FOR LESSON 1 - page 48, #1. Note that the Edit palette values will be blank when scaling a drawing in this version of PageStream (will be fixed in 3.0d), so you must check the rulers to determine the size of the drawing. The final size of the drawing should be w:3", h:1"; however, a minor bug in the scaling routine for drawings will make these values slightly different in this version. - page 49, #1. You do not have to position the mouse pointer at the precise coordinates because drawing objects with the grid on will snap the start point to the closest grid point. - page 51, step 9. It is no longer true that 117% is the optimum view magnification for 12 point body text. (That was true in v2.2, but not v3.0.) The higher the magnification, the more readable the text, but 12 point type is quite readable even at Actual Size in PageStream 3.0. You should still change to 117% for this lesson so that your work mirrors the manual screenshots. - page 53, #3. The window will remain titled. In this version of PageStream3, template windows are titled (but you are prevented from accidentally overwriting them). NOTES FOR LESSON 5 - page 94, #1. You must create a new document (the size is unimportant) before starting this lesson. - page 94, #3. The text column frame will already be opaque, so you do not need to change this option. - page 94, #4. If your text column frame has a gray background after changing the color to Yellow, you are in four color mode. After you finish #5, you may wish to use Settings/Screen to change to 8 or 16 color mode. - page 95, #5. PageStream 3.0c records two more FILLED ON commands than what is shown in the screenshot. This is normal; please ignore the discrepancy. - page 97, #2. The point for selecting text can be the same as the text column frame's top left corner, so you do not need to add 0.25i to each coordinate as explained in the text. - page 100. Same as page 97. Just type: 'selecttext at 'p2d(click.x) p2d(click.y) CHANGES FROM 3.0b TO 3.0c PAGESTREAM2 DOCUMENT LOADING: - Expanded PageStream2.fontlist file that recognizes more PD fonts. If you have not yet used the FONTLISTv2Analyzer, you should install this new file. If you have previously used the FONTLISTv2Analyzer, you may want to install this file and then use it again. (Not required though since all of your fonts should be recognized.) - The Macros/Analyze FONTLISTv2 macro did not work in 3.0b but is now fixed. If you used this macro to update your PageStream2.fontlist, you must choose it again in this version because it did nothing last time. - Fixed problems with hanging outdents not being properly imported. IMPORT/EXPORT: - Improved ASCII import filter quote conversion. - Fixed ProDraw Clip import line weight problems. - Implemented PageStream text code engine. Send to Editor for text now works as advertised. TEXT: - Text entry speed has been further increased. Typing text in a new frame is twice as fast as 3.0b if the Edit palette is open, and 50% faster if the Edit palette is closed. Having text attribute palettes no longer slows down typing so text entry and editing speed is identical with the Edit palette open and closed now. - Sped up rasterizing PostScript fonts. (The first time you use a PostScript font at outline size, it will appear twice as fast as in 3.0b.) - Fixed the big text object bug. (Create a text object, delete it, create another, crash.) - Obliqued PostScript fonts (ones that have the oblique bit set in the font, such as most Futura and Uniform fonts) are now supported. (This was added in the final version of the 3.0b update, in PS.font 1.0d.) - Fixed Paragraph Format, Right Indent. - Improved PostScript and Soft-Logik bitmap screen font scaling. (It was not as good as v2.2 before, now it's better.) - Monospaced tracking is now implemented. - Changed default tab spacing to 0.333" as indicated in the manual. - Adding style tags will now update the palette lists. - Changed the default background of columns created with Create Columns from transparent to opaque to make it the same as previous versions of PageStream. (Users were confused by the grid and guides showing through the column frames.) - Added support for PFM files as mentioned on page 14 of the manual. (Mac Type 1 support is not done yet.) If you have a font with both AFM and PFM files, you should generally use the PFM because it is smaller. (You can delete the AFM if you wish.) You do not need to have both in the directory, but the extra file will not cause a problem. PRINTING: - Adding font re-encoding for PostScript printing. (In layman's terms, this means that non-standard characters should now print. If you find characters which still don't print, report the font type, font name and character to us for testing.) - Changed the offsets for the HP, Epson and Fargo drivers. Offsets of 0,0 should now be suitable for most people. You MUST change your offsets in the Printing Preferences requester or else your printing will be double offset. - Fixed problems printing backslash characters to PostScript. - Made DMF fonts with spaces in their names print to PostScript. (ie, Roman Bookface and West Side.) - Fixed the other A4 page size problem in the HP.printer driver. - Fixed potential crash problems with the Preference.printer driver. - Added more supported printer models to the Epson.printer driver. - Removed the 'M' printers from the HP driver model list. If you have a HP4M 4ML, 4MP..., you should use the PostScript driver, not the HP driver. If for some reason you wish to print non-PostScript, use the corresponding HP4, 4L, 4P... driver. (These were removed to avoid confusion.) - Stop gadget during printing is now implemented, but will not stop printing until after the current object. (Just like 2.2.) Note that the progress meter is not implemented yet. MACROS & AREXX: - New commands: openbusyrequester, setbusyrequester, getbusyrequester, closebusyrequester. (Look at the improved TechReport.REXX script for an example of correct usage.) - getcoord macro works again. (This was used by the StickyNote script which is why it didn't work in 3.0b.) - New parameters for: pasteobject, placegraphic, savedocument. PAGELINER: - If you run it a second time (ie, if you use Send to Editor for text when PageLiner is already started), it no longer presents a Shutdown/Cancel requester. - Modified spell checker to ignore PageStream text codes. MISC: - Save as Template is now implemented. - Fixed snap-to-grid problems. Objects should now snap correctly. - Fixed Paste command to paste objects in the center of the window rather than the objects' original position. - Scrolling popup menu gadgets now scroll 10 times as fast instead of 4 times as fast when the mouse pointer is over the scroll arrow. This makes it feel more responsive when you have a large number of fonts. - Scrolling popup menu gadgets now do not start to scroll when the mouse pointer is over the up or down arrows until you move the mouse at least 2 pixels. This prevents the Font popup gadget in the Edit palette from scrolling when it first opens. - Fixed a problem with Save As in which the internal document name would not get changed. - BMP filter problems fixed. - Fixed some insertion point (cursor) redraw problems. - Fixed a memory problem when exporting macros. - Changed the weight of hairlines from 0 to 0.3pt as indicated in the manual. - Fixed screen display and non-PostScript printing of bevel joins. - Adding a font path when it already exists will now update the existing path. CHANGES FROM 3.0a TO 3.0b TEXT: - Text entry and formatting is 50% faster in this version. - Paragraph Format: Left/First/Right Indent are now implemented. - Ctrl C and D special character shortcuts are now implemented. - Insert Character works again. - Default tab spacing has been implemented. - Cut/Copy/Paste in frameless text objects works now. - Keyboard shortcuts for moving the insertion point in frameless text objects have been implemented. - Edit palette arrow gadgets for text size, width, tracking and leading can now be used with a Shift key for greater precision. - Fixed the Convert Case commands. - Pasting a text wrapped object now updates text frames overlapping it. - Fixed the displaying of PS or DMF fonts at low magnifications or very small sizes on screen which would offset them from their baseline. - Fixed Times Bold/Italic reversal on PostScript printers. - Fixed ASCII, FTXT, Excellence and Final Writer filters for problems caused by converting more than 11 dashes. - Double spacing between sentences no longer permits the 2nd space to fall at the beginning of a line. - Fixed all known problems for printing Compugraphic fonts to PostScript. - Linked frames on the same page should now update properly. - Fixed leading problem when the previous line had a larger point size. - Fixed problems with leading options in the Edit palette. PRINTING: - Fixed color HP.printer DeskJet problems. - Fixed HP.printer PaintJet problems. - New Fargo.printer driver for the Primera wax thermal and dye sublimation printer. (This will not work with the Primera Pro.) - Improved Epson.printer color printing to decrease saturation. - Corrected A4 paper size in HP.printer and Epson.printer. - Print requester options will now remain set from one print job to the next during the current session. - Improved ordered dithering for HP, Epson and IFF ILBM printer drivers. - PostScript: error handler is now off as the default. If you have saved your settings, you can speed up printing by turning off the error handler in Printing Preferences and then saving your settings again. - Fixed color PostScript printing of certain pictures. - Fixed display and printing of the bold and italic variations of the standard 35 fonts, by adding DMF files for these fonts. (This requires the PS3B2.LHA archive.) - Fixed some problems printing drawings to PostScript. - Fixed printing multiple frames on one page to PostScript. - Fixed some non-standard character PostScript printing for resident fonts and for downloaded Adobe Standard Encoded fonts. - Fixed HP.printer printing when the paper size was greater than 8.5x11". PAGESTREAM2 DOCUMENT LOADING: - If you converted 2.2 documents to 3.0 with previous versions of 3.0, each article will really be one paragraph. (New Line codes were inserted instead of New Paragraphs. Refer to page 168 for info on new lines vs new paragraphs.) This is somewhat important, because paragraph spacing cannot be used if the entire article is one paragraph, and things like automatic drop caps and bullets will only appear at the start of the article. You can fix this by positioning the insertion point at the start of each 'paragraph' (new line), then pressing Backspace and then Return. Alternatively, if you haven't already made a change to the document in 3.0, simply reload the 2.2 document into 3.0b to convert it properly. - Text was being loaded with Track table set to Normal, which could change line breaks. It now loads with Track table set to None. - Fixed the problem with PageStream2 text frames having multiple columns on loading. MACROS & AREXX: - added the sendtopageliner script. MISC: - Loading a 3.0 document now preserves double-sided master page. - PageStream 2.2 documents now load unnamed. - Changed AmigaDOS 2.x color allocation to be more stingy with colors. - Text frame backgrounds now default to transparent instead of opaque. If you have saved your Toolbox Preferences, you can change this and then save your settings again. - Settings/Screen: if the Display DPI text gadgets are blank, PageStream will use the default resolution for most standard screen modes now. This is convenient if you often switch between screens of different standard resolutions. If you enter values, it won't switch automatically. - Problems with moving drawings containing groups and lines are resolved. - Several of the filters have been reduced in size to save memory. - Fixed problems with master pages renaming to default. - Added a busy pointer when showing font samples. - Added the ability to change PageStream3's interface colors. Refer to the Screen option in the Interface topic group in the main PageStream3 Help screen for more information. You must download the PS3B3.LHA archive to get the new version of the help files. - The Visual Reference gadgets in the Help system did not work under AmigaDOS 2.x. The new help files in the PS3B3.LHA archive fix this problem. Depending on when you received PageStream3 and whether you had AmigaGuide on your system already, the WDisplay utility may not have been installed in your Sys:Utilities directory. If it is not there and you have AmigaDOS2, you should decompress it from the Guide.LHA archive on your original disk 2. BME - New Emboss and Sharpen effects have been added! Refer to the help system for information. (The new help files are included in the PS3B3.LHA archive.) CHANGES FROM 3.0 TO 3.0a TEXT: - Frameless text objects implemented! - Eliminated extra text redraws when applying attributes! - Current attribute defaults are now implemented. (You can now place the insertion point (cursor), change the font or other attributes, and then type, without reverting back to Triumvirate.) - Edit palette arrow gadgets now repeat for text features. - Changed default alignment from justified to left. - Amiga keyboard shortcuts now work. - You now get a normal height cursor when you click in a frame. - Right indent tab are now done. - Stopped text from being displayed outside of its frame. PRINTING: - New custom Epson driver included! - HP color variants now supported. - Some Canon variants are now supported. Choose the Epson driver from the Printing Preferences' Type popup, and choose the Canon model from the Model popup. (These Canon printers are similar to Epson printers.) - Printing Compugraphic fonts to PostScript now saves the generated PFB versions of the fonts on disk. This solves the timeout problem. - Improved Floyd-Steinberg dithering. - TO color percentage fixed for PostScript. - Collate now defaults to off. - Do Not Print flag (Edit palette, Object/Edit) now implemented. - Parenthesis problem (PostScript) fixed. - Multiple copy problem (non-PostScript) fixed. MISC: - Tab key problem fixed. - Enforcer hits on changing Edit palette modes fixed. - Object selection (it selected the stack of objects) fixed. - Select and move immediately problem fixed. - Click click drawing for Column tool fixed, and all click click drawing made less sensitive. (Click click drawing is the 2.2 method of drawing objects instead of 3.0's drag draw method and is still supported for those who haven't learned the new method yet.) - View Prefrences Scale problem fixed. - Toolbox Preferences: Pie and Arc are no longer reversed. - Toolbox Preferences: Opaque/Transparent is no longer ignored. - Fixed the Set Grid pica problem. - Font Prefreferencess: Cache settings are now loaded. - Autoscroll now works when resizing objects. POSTSCRIPT FONTS: - Fixed enforcer hits when adding ABF files. YOU MUST UPDATE ALL FONT PATHS WITH ABF FILES IN THEM OR THEY WILL NO LONGER WORK. COMPUGRAPHIC FONTS: - Intellifonts should now rotate/slant/twist correctly. FILTERS: - ASCII and IFF FTXT tabs now import correctly. - PageStream2 document filter now loads frameless text objects correctly. - An expanded PageStream2.fontlist file is included for greater compatibility. BME: - Trace effect now works with lines and curves. (File requester wouldn't open to let you save your traced drawing.) UNIMPLEMENTED FEATURES To help you know what isn't finished, here is a list ============================= Archive contents ============================= Original Packed Ratio Date Time Name -------- ------- ----- --------- -------- ------------- 2708 2708 0.0% 01-Nov-94 22:37:38 3.0cUpdate/BMP.LHA 39337 39337 0.0% 01-Nov-94 20:57:54 3.0cUpdate/Engines.LHA 14089 14089 0.0% 01-Nov-94 21:01:24 3.0cUpdate/Epson.LHA 14109 14109 0.0% 01-Nov-94 21:01:28 3.0cUpdate/Fargo.LHA 29994 29994 0.0% 01-Nov-94 22:36:20 3.0cUpdate/Filters.LHA 8134 8134 0.0% 14-Oct-94 12:12:16 3.0cUpdate/FLister.LHA 9505 9505 0.0% 01-Nov-94 22:37:02 3.0cUpdate/Freehand.LHA 72525 72525 0.0% 01-Nov-94 22:55:00 3.0cUpdate/Help.LHA 14018 14018 0.0% 01-Nov-94 20:59:52 3.0cUpdate/HP.LHA 6981 1794 74.3% 01-Nov-94 22:55:52 3.0cUpdate/Install-PageStream3.0c 735 375 48.9% 01-Nov-94 22:51:40 3.0cUpdate/Install-PageStream3.0c.info 7518 7518 0.0% 01-Nov-94 22:34:54 3.0cUpdate/Macros.LHA 39272 39272 0.0% 01-Nov-94 22:36:48 3.0cUpdate/PageStream2.LHA 182500 182500 0.0% 01-Nov-94 23:21:24 3.0cUpdate/PGSpatch.LHA 10794 10794 0.0% 01-Nov-94 22:48:38 3.0cUpdate/PLpatch.LHA 36834 36834 0.0% 01-Nov-94 21:01:54 3.0cUpdate/PostScript.LHA 11341 11341 0.0% 01-Nov-94 21:00:28 3.0cUpdate/Preference.LHA 7399 7399 0.0% 01-Nov-94 22:37:18 3.0cUpdate/ProDraw.LHA 7982 7982 0.0% 01-Nov-94 22:49:40 3.0cUpdate/Read.LHA 14636 9285 36.5% 20-Sep-94 17:20:02 3.0cUpdate/spatch 16027 16027 0.0% 01-Nov-94 22:38:46 3.0cUpdate/Tips.LHA 628 269 57.1% 13-Oct-94 03:51:16 3.0cUpdate.info 1261 611 51.5% 01-Nov-94 20:49:20 Read.1st! 522 266 49.0% 13-Oct-94 03:04:52 Read.1st!.info 102938 102938 0.0% 01-Nov-94 23:45:32 3.0cUpdate/Libs.LHA -------- ------- ----- --------- -------- 651787 639624 1.8% 03-Nov-94 10:59:28 25 files