Path: menudo.uh.edu!usenet From: akiy@netcom.com (Jun Akiyama) Newsgroups: comp.sys.amiga.reviews Subject: REVIEW: GPFax Followup-To: comp.sys.amiga.datacomm Date: 25 Aug 1993 13:56:53 GMT Organization: The Amiga Online Review Column - ed. Daniel Barrett Lines: 325 Sender: amiga-reviews@math.uh.edu (comp.sys.amiga.reviews moderator) Distribution: world Message-ID: <25fr35$i54@menudo.uh.edu> Reply-To: akiy@netcom.com (Jun Akiyama) NNTP-Posting-Host: karazm.math.uh.edu Keywords: fax, printing, commercial PRODUCT NAME GPFax version 2.342, GENERIC version [MODERATOR'S NOTE: This review was updated on August 30, 1993. Search for the text "[UPDATE" to find updated information. -Dan] BRIEF DESCRIPTION Send/Receive faxes with a faxmodem. AUTHOR/COMPANY INFORMATION Company Name: GPSoftware Authors: Dr. Greg Perry, Richard Carde Address: 21 Aloomba Road Ashgrove, Brisbane QLD 4060 Australia Telephone: +61 7 366 1402 FAX: +61 7 366 1402 E-mail: gregp@gpsoft.adsp.sub.org rc@splat.aarnet.edu.au LIST PRICE GPFax version 2.01 had a list price of $120 (US), but I was unable to find the list price of any of the current versions. I paid $74.99 for my copy, although I know some mail order companies will be lower. You can sometimes obtain this software more cheaply when it is bundled with a faxmodem. SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS HARDWARE This version of the software requires a Group 3, Class 2 TIA TR29.2 supporting faxmodem. At least 1 MB of RAM is required, but the manual says: "HIGHLY RECOMMEND a minimum of 1 MB of CHIP memory and at least 0.5 MB of FAST memory." A hard drive is not required, but the manual once again recommends a hard drive "for most efficient performance." The program and supporting files on my hard drive take up about 230,000 bytes including its own font and printer driver. The program can be run on a 68000 CPU, but faster processors are recommended, especially for higher characters per second throughput on Workbench 1.3. SOFTWARE Workbench 1.3 or above is required. It works fine even under Workbench 3.0. COPY PROTECTION None. Hard drive installable. MACHINE USED FOR TESTING Amiga 4000/040 2 MB Chip RAM, 4 MB Fast RAM Workbench 39.29, Kickstart 39.106 SupraFaxModem v32.bis 14,400 baud REVIEW There are two versions of the GPFax software: one for the Supra modems, and another "generic" version for others. Although I have a Supra modem, I was able to purchase only the generic version, as my retailer carried only that copy. However, Dr. Perry has told me that for an additional $25, one can cross-grade from the generic version to the Supra version. So, to save money, buy the correct version. (The generic version works fine on my SupraFaxModem; so until I get a large shipment of money in sometime, I think I'll stick with it. Supposedly, the Supra code is more optimized for the Supra modem. I'll followup if I cross-grade.) The first thing to check when you boot up your program the first time is its version. GP has released several versions in a relatively short period of time, ranging from 2.01a, 2.01b, 2.30, 2.341, and 2.342. I had 2.01a (2/5/92). Don't fear; the patches are available on the Aminet ftp sites, although one may have to apply more than one patch to get to the current version (2.342). However, because of this upgrading fiasco, the included manual does not list all of the features of the software. For example, in order to use the program on the Workbench, you need to enter "SCREEN=WORKBENCH" as a tooltype in the GPFax icon. Such information is included in some of the updates but may be missing in others. I basically downloaded all of the patches and then read all of the documentation files to make sure I didn't miss anything. A more current, complete manual would be very welcome. [UPDATE: GPFax is now shipping with a completely rewritten manual with all of the upgrades included.] Installation onto a hard drive is relatively simple; just double click on the Install-GPFax icon on the included floppy, and Commodore's Installer program will guide you through the process. (Note: some of the upgrades include "new" fonts and printer driver, which you may need to install manually. I do not know if these fonts and driver are actually any different than the ones included with 2.01, but for safety's sake, I installed them.) The drawer created will have the GPFax program, a ViewFax program to view faxes without actually having to enter GPFax, a FAX_IN drawer and FAX_OUT drawer (where Faxes are stored when they come in and before they are sent out, respectively), a directory with some ARexx examples, some configuration files, and some documentation files. Once booted, the GPFax screen (or window, if you set that tooltype) is shown. The first thing you may notice is the lack of menus. Everything in GPFax is button/keyboard driven. I suppose this is used as a simplification device, but I found it slightly annoying in the beginning, though I have since grown accustomed to it. The first time you run the program, you will need to set some environment variables. These variables include your company name, your fax number, and your phone number, all of which will be printed onto an optional cover sheet for each fax. Also, you can set which device you wish to use, how many rings before Auto Answer picks up the phone, and the default font used for the Convert function (described below). In addition to the above "Environment" section, there is an "Options" section in which you can set other preferences such as Quiet Modem (which deactivates your modem speaker), Make Icons for faxes, create a Workbench Appicon (for drop-in faxing capabilities), and Use Security (which allows you to screen faxes by their incoming ID number). There is, of course, a phonebook in which you can store your most often dialed fax numbers. Here, you can enter a Name, Number, a Comment, and a Group field as well as cover page details for each entry. The number field can be marked with a "Man!" before the number itself if the fax receiver must be notified to place their fax machine into receive mode before sending the fax. The Group field can group certain names into the likes as "Customers" and "Vendors" to facilitate faxing a group of people. The cover page details include your company name, the name of the person sending the fax, your fax number, your voice number, the name of the company to which the fax is addressed, the name of the person to whom the fax is sent, a "header" IFF to place at the top of the cover page, and a "signature" IFF to place at the bottom. In creating a fax, you have two choices: create an ASCII text or 2-color IFF picture which is fed into the Convert program, or use a word processing program or a desktop publishing whose output will be sent to the faxing driver rather than the normal printer driver. The former will use the aforementioned font that was set in the Environment section to create a fax of the text in that font, or just plainly use the two-color IFF pixel-by-pixel. This, of course, will not produce a very professional looking fax. The latter option, to use the fax printer driver, is much better, producing a fax output of up to 210 dpi by 196 dpi. This is much simpler too, as all you need to do is create a document (for example, in Pagestream), set the printer configuration to send to the preferences printer, and print. GPFax will intercept the file and send it to its Fax_Out drawer, converting it into a FAX format on the fly. Before sending the fax, you can view it on the screen using the Display command. You can set the resolution of this screen within the Options sections; I use a Super72 Super Hires Laced screen. Here, you can specify if you wish to view at a 1:1, 1:2, or 1:4 ratio. (The 1:1 shows about 10% of the page, 1:2 shows about 60%, and 1:4 shows the entire page for me.) You also have the option of printing the fax if you wish for a hard copy before sending it. In order actually to send a fax, all you have to do is select which fax pages you wish to send, choose the phone number to which you wish them sent, either enter a number or choose an entry from the phone book, and you're done. The fax is sent! You can also Schedule your faxes to be sent at a specific time, in case you wish to save money by faxing after 11pm, or perhaps during your lunch hour. GPFax will even reschedule your transmission until a later time, if it attempts the fax but find a busy number. In order to receive a fax, you can either set the Auto Answer mode on within the Options section, or manually Receive a fax. Either way, the fax will be downloaded into the Fax_In drawer, which you can Display (as explained above) or Print to your preference printer. If you wish, the program will convert the fax into an IFF file. GPFax also includes an ARexx capability to, as the manual states, "allow almost complete remote control of the program from an ARexx script." I, being no ARexx guru, have not used the ARexx capabilities at all. Ich kann nichts sagen. Es tut mir leid. DOCUMENTATION The manual included with the original disk was created for version 2.01. The upgrades on Aminet also have additional information regarding the upgraded versions. The documentation is mediocre. Because of the upgrading, I found some discrepancies between the illustrations in the manual and the real screens in the program. However, the manual is followable, and the program is really pretty simple to use, luckily. [UPDATE: GPFax is now shipping with a completely rewritten manual with all of the upgrades included.] As I mentioned above, the documentation included with the upgrades could be better. For example, the documentation for the generic version also included a lot of information regarding the Supra version. Why is it in there? It's not needed. LIKES AND DISLIKES I found GPFax to be pretty easy to use. The no-menu interface annoyed me at first, but I have grown accustomed to it now. The quality of faxes it sends and receives is good. There are a few things I do not like, though. GPFax, whenever it receives a fax or intercepts a printing file to create a fax, uses a pretty cryptic naming convention to name the faxes. Although this can be slightly modified using a "Popup" print menu to assign another name to these fax files, the fact that the program appends an ever-increasing number (starting from 002 and working its way up) to the end of that file name on each and every file. I keep finding my self renaming each fax as it is created in order to keep track of which fax is which. A more intuitive fax naming convention could have been used here. COMPARISON TO OTHER SIMILAR PRODUCTS When I first got my faxmodem, I tried out the "elcheapofax" public domain program. I found it to be quite cryptic, and now find GPFax to be a pretty good buy. BUGS I haven't found any bugs per se, but have encountered a problem in creating files by having the program intercept the file being printed. Although most programs can route their output to the printer chosen in the Workbench Preferences, some programs are unable to do this. I could not get Word Perfect to output directly to GPFax, and had to resort to Pagestream to use this capability. (Of course, Pagestream presents a MUCH better output than Word Perfect, so I shouldn't complain....) In addition, one of the upgrade documentation mentions a problem when using Final Copy I and II. It states that "this has been an ongoing problem for a several [sic] months now and we have been getting a number of irate users of GPFax complaining bitterly to us. After considerable analysis of this problem, we found that Final Copy II (Release 1 sep 26.92) was the culprit." The note concludes, "Enough! If you are one of the people who suffer from this problem, COMPLAIN TO SOFTWOOD not us!! After discussing this problem with Softwood, they have kindly offered to upgrade users of earlier version [sic] of Final Copy II to the later version which has been rewritten to work correctly." As aforementioned, don't forget to get the GPfax patches from Aminet (under biz/patches) if you get a version older than 2.342. VENDOR SUPPORT I sent E-mail to Dr. Greg Perry regarding the possibility of cross-grading from the generic version to the Supra version, and he replied with a note saying $25 and the original disk will allow me to upgrade. I personally find that amount to be expensive and will reconsider whether or not to cross-grade. I am not associated with the vendor in any way except as a customer, unless I have some psychic link with them I don't know. :-) [UPDATE: Dr. Greg Perry of GP Software saw the original review and contacted me to address my concerns about the documentation. That is good customer support.] WARRANTY There's a 90 day warranty on the supplied disk which must be accompanied by a proof of purchase, and applies only to the original purchaser. CONCLUSIONS On a scale from one to ten ducks (one duck being the equivalent to "Pond Scum," and ten ducks garnering a "Totally ducky!" description), I give GPfax eight and a half (ouch) ducks. My final impressions are that I'm quite happy I got the program, and I hope they'll continue to provide upgrades available through Aminet. COPYRIGHT NOTICE I hereby relinquish the copyrights to this review to Daniel Barrett, as he is such a cool guy and posts funny articles to Usenet. Whatever he wishes to do with my inane words, he is free to do so. So nyaah. BLAZEMONGER NOTICE For you BLAZEMONGER II players out there, this review, in its entirety (including the headers), is the secret password jump from level 323,832,123.021 to 763,334,292.8A0. Just type it in during the digitized sample of Dave Haynie screaming "MEGA1-RAMMM-SEEYYYYYYY!!!", and you're there. Wow. How did the BLAZEMONGER programmers know? (And when did Mr. Haynie say that?) -- UCLA undergrad trying to [] "Denn des Anschauns, siehe, ist eine Grenze graduate and get a job [] Und die geschautere Welt will in after studying NLP at [] der Liebe gedeihn." Tokyo Inst. of Tech. [] -- Rainer Maria Rilke, "Wendung" --- Daniel Barrett, Moderator, comp.sys.amiga.reviews Send reviews to: amiga-reviews-submissions@math.uh.edu Request information: amiga-reviews-requests@math.uh.edu Moderator mail: amiga-reviews@math.uh.edu Anonymous ftp site: math.uh.edu, in /pub/Amiga/comp.sys.amiga.reviews